Emergency line open 24/7 · Times shown in ET
AC repair in Andover, MA
Andover sits in Essex County and we cover 5 ZIP codes across it. One call routes your cooling fault to an independent local provider.
Your call connects you with an independent local HVAC provider. No obligation.
Call (855) 321-3194How do I get AC repair in Andover, MA today?
Dial (855) 321-3194 with your ZIP code ready. We match it against providers covering Andover, MA and connect the call. The provider tells you when they can reach you and what the work costs before they start it.
Cooling calls in Andover
An air conditioner that will not cool in Andover is usually telling you about airflow before anything else. Filters, blower wheels and coils account for more calls through this line than refrigerant and compressors combined.
This grid lists the 5 ZIP codes we cover in Andover. They share one phone line and one routing process, and the ZIP code is the only field that changes which providers appear.
Local considerations
The small-tier cost bands on this page reflect what completed jobs in markets like Andover have run to. Essex County providers set their own prices, and the figure you are quoted governs.
Outdoor coil condition drives more Andover cooling calls than most homeowners expect. A coil that cannot reject heat pushes head pressure up, efficiency down, and in extreme cases trips the compressor on thermal overload.
Looking for the other side of the system? Heating Repair in Andover, MA.
Services
Cooling services in Andover
These are the cooling services most often requested from Andover. Each links to the full page for that job, including what usually breaks and what the work typically costs.
6 services
AC Repair in Andover
Summer load exposes cooling faults that stay hidden in mild weather, so a system that held setpoint in May can fall behind in July without anything new having broken.
View ac repair
02 AC Installation and Replacement in Andover
Systems on R-22 refrigerant face a replacement conversation regardless of condition, because the refrigerant is no longer manufactured and recharging becomes expensive.
Details
03 Heat Pump Repair in Andover
Cooling-mode heat pump faults look identical to standard AC faults until the technician checks the reversing valve and the defrost board.
Details
04 HVAC Maintenance and Tune-Up in Andover
A capacitor check before summer is cheap insurance against the same component failing on the hottest afternoon of the year when every technician is already booked.
Details
05 Thermostat Installation and Repair in Andover
A missing C-wire is the most common reason a new smart thermostat fails to work after installation, and it is a straightforward wiring addition on most systems.
Details
06 Duct Cleaning and Sealing in Andover
A duct system that loses 20% of its air before reaching the registers makes the cooling equipment work harder and extends run times without improving comfort.
DetailsInteractive
What is your thermostat reading?
Drag the dial to the temperature your thermostat shows now. The readout names the likely cause band, how urgent it is, and which page to read next.
78
Degrees F
- Likely cause band
- Cooling capacity loss: dirty coil, low refrigerant charge from a leak, or a failing capacitor.
- Urgency
- Call today
- Read next
- AC not cooling
What to do while you wait
- Set the thermostat to off so the system stops cycling against the fault.
- Clear leaves, grit and debris from the outdoor unit so air can move through the coil.
- Replace the filter if it is visibly loaded. Airflow problems often start there.
- In extreme heat, move pets and anyone vulnerable to the coolest room and keep fluids nearby.
Nearby
Nearby cities we cover
Problems we route in Andover
Shut the system off, note what it was doing before it stopped, and call. Those two details save diagnostic time in Andover as anywhere else, and diagnostic time is what you are paying for first.
Emergency
If this is happening right now
Call now
- No cool air during a heat advisory
- No heat with outdoor temperatures below freezing
- Burning smell from the vents
- Water pooling at the air handler
- Ice on the line set
- Breaker tripping on every cycle
Call (855) 321-3194 and give your ZIP code.
Shut it off and call the utility or 911 first
- You smell gas: leave the building, then call the gas utility or 911
- Smoke or sparking at the equipment
- A carbon monoxide alarm is sounding: leave and call 911
Reference: CPSC recalls and US Fire Administration heating fire safety.
Shut it down safely
- Set the thermostat to off so the system stops cycling.
- Kill the breaker at the air handler and at the outdoor condenser.
- If you smell gas, leave the building first, then close the gas shut-off at the furnace only once you are outside and have called the utility or 911.
- Clear the area around the equipment and keep pets and people away from it.
A 24/7 line means the phone is answered around the clock in ET. It does not mean a technician is standing by in every market at every hour.
Same-day and 24/7 emergency services are subject to provider participation, location, technician availability, and demand. Availability is not guaranteed and may vary by market and appointment capacity.
Call (855) 321-3194Questions
Andover HVAC questions
Why is my AC running but not cooling?
The three usual answers are restricted airflow, low refrigerant charge from a leak, or a failed capacitor stopping the compressor from starting. A technician separates them with a static pressure reading and a superheat measurement.
Can I get maintenance rather than a repair?
Yes. Maintenance visits cover coil cleaning, condensate drain clearing, filter replacement and a capacitor check. These are booked rather than dispatched as emergencies, and they typically cost less than a repair call.
What does AC repair cost in Andover?
We do not quote prices. The provider who attends inspects the system, tells you what the work costs, and confirms that figure on site before starting. Refrigerant leak work generally takes longer than a straight part swap.
How long does a cooling repair take?
Most repairs finish in a single visit of one to three hours once the fault is diagnosed and the part is on the truck. Components that have to be ordered, such as a specific control board, add a day or more.
How do you choose which provider gets my call?
By ZIP code first, then by which providers are accepting calls at that moment. We do not rank providers by price or sell placement in a results list, and we do not publish ratings of any kind.
Written and fact-checked by the HVAC Emergency USA editorial team. Last updated . Editorial policy.